Network > Service Gateway > Console User Guide

This guides describes how to use the Service Gateway service from the console.

Service Gateway

Create a Service Gateway

To create a service gateway, use the following steps:

  1. Go to Network > Service Gateway.
  2. Click Create Service Gateway, and the screen for creation appears.
  3. Enter the Name to use for the service gateway.
  4. Choose a VPC. A service gateway dependent on the selected VPC is created.
  5. Select a Subnet. The IP of the service gateway is assigned from the selected subnet.
  6. Select a Service. When an instance accesses the IP assigned to the service gateway, it is connected to the service selected in this item.

View a Service Gateway

You can check the created service gateway on the Network > Service Gateway page. If you select a service gateway, the service gateway information appears at the bottom.

Modify a Service Gateway

A service gateway can be modified as follows. You can only change the Name and Description.

  1. Go to Network > Service Gateway.
  2. Click Change Service Gateway and change items on the change screen.

Delete a Service Gateway

To delete a service gateway, select the service gateway you want to delete in the Network > Service Gateway page and click the Delete Service Gateway button.

Use a Service Gateway

Check the Service Gateway IP

  1. Go to Network > Service Gateway.
  2. Check the IP address in the list of service gateways.
    When the VM Instance accesses this IP address, it is connected to the service that the service gateway is connected to.

Connect to the Service Gateway

For example, if the IP address of the created service gateway is 192.168.1.42, the service can be accessed in the following ways.

  • If you connect to the service gateway IP from the VM Instance, you can connect to the service selected when creating the service gateway and use the service.

    • If you use the https protocol with an IP address, you may encounter certificate related errors.
    • If you need to use https, add the IP address and URL to /etc/hosts of the VM Instance.
    • Example: Downloading a file from object storage using an IP address
      ~# wget http://192.168.1.42/v1/AUTH_8222a22c22244badbf876dcd521f3f98/test-obs/test_file.txt
      
  • URLs are not supported when accessing the service using a service gateway. If you need URL access, you need to add the URL to the /etc/hosts file as in the example below.

    • Example: Downloading a file from object storage using a URL
      Add the IP address of the service gateway and the URL of the object storage to the /etc/hosts file as shown below.

      192.168.1.42    kr1-api-object-storage.nhncloudservice.com
      

      Connect to the URL added to /etc/hosts instead of the IP address

      ~# wget https://kr1-api-object-storage.nhncloudservice.com/v1/AUTH_8222a22c22244badbf876dcd521f3f98/test-obs/test_file.txt
      

Example of Using Object Storage from a Service Gateway

Content related to object storage are described only at the level required for explaining the example. For details on how to use object storage, refer to User Guide > Storage > Object Storage.

Create a Service Gateway

To use the Object Storage API, you must obtain an authentication token. To use object storage in a VPC in an isolated environment where internet is not available, you must obtain an authentication token also using the service gateway, and create the service gateway according to the following steps.

  1. Choose the Object Storage service to create a service gateway.
    A service gateway for accessing the Object Storage API.
  2. Choose the IaaS API Identity service to create a service gateway.
    A service gateway for obtaining the authentication token.
  3. Check the IP addresses on the two service gateways that have been created.

Edit the /etc/hosts File

For example, if the IP address of the service gateway created by selecting Object Storage is 192.168.1.42 and 192.168.1.57 is assigned as the IP address of the service gateway created by selecting IaaS API Identity, add the IP addresses and URLs to the /etc/hosts file of the VM Instance, as shown below.

[Note] You can check the API URL address of object storage by clicking the Set API Endpoint button in Storage > Object Storage on the console screen.
[Caution] Since the URL address of the Object Storage API used by each region is different, make sure that you check the URL in the Set API Endpoint.

192.168.1.42    api-identity-infrastructure.nhncloudservice.com
192.168.1.57    kr1-api-object-storage.nhncloudservice.com

Obtain the Authentication Token

Set the API password for object storage and get an authentication token.

  • Set the API password

    1. In Storage > Object Storage, click the Set API Endpoint button.
    2. Enter the password to use in Set API Password on the API Endpoint settings screen and click Modify.

      [Note] For details on how to use it, refer to User Guide > Storage > Object Storage > API Guide.

  • Request for obtaining the Authentication token
    Make a request to obtain the token to the URL of the service gateway created for the IaaS API Identify service using the NHN Cloud login ID and the password of Set API Password set previously.

    • Use NHN Cloud login ID for auth.passwordCredentials.username
    • Use the password entered in Set API Password for auth.passwordCredentials.password
      ~# curl -X POST -H 'Content-Type:application/json' https://api-identity-infrastructure.nhncloudservice.com/v2.0/tokens -d '{"auth": {"tenantId": "2fda9d4b88244a0a92ff23841198e2e6", "passwordCredentials": {"username": "example@nhn.com", "password": "example123"}}}'
      
  • Response for obtaining the Authentication token
    In the response below, the value of the access.token.id entry is the authentication token. The authentication token is valid until the time in access.token.expires.

        {"access":{"token":{"id":"gAAAAABiVnmCOJVJhh1W2eXGo3aL0eaZxXmd-SMDMIE3zmip2lXy6eH0BlZAlTZBG20dWEm7TF4zi4YIOTKnc6yKh_wqZsyxgMWKkpVNShzE-k6GaSThBP54QeUePSjC2t-R10X6G4xL_Wecl-V-lV-bnOfVo6Ccpz6rv9eLYJnbJw7KrIMSSiY","expires":"2022-04-13T19:19:30Z","tenant":{"id":"2fda9d4b8821111192ff23841198e2e6","name":"tTMgSSSF","groupId":"XXj2zkH7777modGU","description":"","enabled":true,"project_domain":"NORMAL","swift":true},"issued_at":"2022-04-13T07:32:14.000441"},"serviceCatalog":[{"endpoints":[{"region":"KR1","publicURL":"https://api-identity.infrastructure.cloud.toast.com/v2.0"}],"type":"identity","name":"keystone"},{"endpoints":[{"region":"KR2","publicURL":"https://kr2-api-storage.cloud.toast.com/v1/AUTH_2fda9d4b88244a0a92ff23841198e2e6"},{"region":"KR1","publicURL":"https://api-storage.cloud.toast.com/v1/AUTH_2fda9d4b88244a0a92ff23841198e2e6"}],"type":"object-store","name":"swift"}],"user":{"id":"80884888887b45dbaf9b815117130671","username":"5111111c-b111-4b11-b11b-01111f81111f","name":"5211122c-bfc4-4115-b11b-05b52f84
    

Use the Object Storage API

When you have finished obtaining the authentication token, you can use the Object Storage API. Assuming that a container named example is created in the object storage and test_file.txt is uploaded to the container, you can query the file in the container by using the API as shown below.

  • Request
    Request by adding the authentication token to X-Auth-Token

    ~# curl -X GET -H 'X-Auth-Token:gAAAAABiVnmCOJVJhh1W2eXGo3aL0eaZxXmd-SMDMIE3zmip2lXy6eH0BlZAlTZBG20dWEm7TF4zi4YIOTKnc6yKh_wqZsyxgMWKkpVNShzE-k6GaSThBP54QeUePSjC2t-R10X6G4xL_Wecl-V-lV-bnOfVo6Ccpz6rv9eLYJnbJw7KrIMSSiY' https://kr1-api-object-storage.nhncloudservice.com/v1/AUTH_2fda9d4b88244a0a92ff23841198e2e6/example
    
  • Response
    Check the list of files in the object storage container

    test_file.txt
    
TOP